JOINTSAVER voegvulling

Het JOINTSAVER voegprofiel is een permanent voegsysteem dat open voegen in betonnen bedrijfsvloeren afdicht. De JOINTSAVER afdichtingen kunnen binnen en buiten toegepast worden in voegen met of zonder dilatatieprofiel.

JOINTSAVER is placed on the joint gap under compression and it pushes at the side of the joint gap. Therefore, as the gap widens, the compressed JOINTSAVER will expand to remain in contact with the sides, thereby permanently filling the joint gap. JOINTSAVER comes in several types and sizes, and it can be used for joint gaps from 10 mm up to 40 mm wide, whether they be formed concrete slabs, formed steel armored joints, internal or external joints, or even architecturally decorative joints. JOINTSAVER is suitable for applications such as internal and external free-movement joints, cold store joints, seismic joints, concrete arris repairs and decorative applications.

JOINTSAVER provides easy and fast installation, excellent chemical resistance and the ability to immediately accept traffic after installation. The special compressible closed-cell foam center strip is fire retardant and has high regenerative properties and excellent resistance to most contaminants usually found on floors, such as oils, acids and UV light.

Types

Standard

JOINTSAVER Standard is suitable for joint gaps from 10 mm up to 24 mm wide. It is ideal for use on good quality internal floor joints and it can also be used externally but not suited to rounded edge joint arris’s. This product is suitable for foot traffic, as well as pallet trucks and hard wheeled fork lift trucks. 

Afmetingen

Gedetailleerde technische informatie

Duidelijke productinformatie over onderwerpen als opnamecapaciteit, eventuele bijlegwapening, betonsterktes etc. kan in de technische handleiding gevonden worden.

Types

Extra Wide

JOINTSAVER Extra Wide is suitable for joint gaps from 22 mm up to 41 mm wide and it can be used in the same applications as the Joint Saver Standard. Extra wide particularly ideal for use on high traffic pedestrian walkways in Airports and Shopping Malls. The product has a pleasing aesthetical appearance, with its 3 parallel metal strips, and it will accept small wheeled traffic such as suitcases and shopping trolleys. 

Afmetingen

Gedetailleerde technische informatie

Duidelijke productinformatie over onderwerpen als opnamecapaciteit, eventuele bijlegwapening, betonsterktes etc. kan in de technische handleiding gevonden worden.

Types

Gripper

JOINTSAVER Gripper can be used on joint gaps from 10 mm up to 41 mm wide. It is ideally suited for joints where steel armouring of the arris is present, or the arris’s edges are rounded. Gripper is also suitable for areas where traversing loads might be dragged across the joint, including doorways, at the top of ramps. 

Afmetingen

Gedetailleerde technische informatie

Duidelijke productinformatie over onderwerpen als opnamecapaciteit, eventuele bijlegwapening, betonsterktes etc. kan in de technische handleiding gevonden worden.

Contact

Martin Smit

Martin Smit

Technisch-commercieel adviseur

Tel. +31 (0)263843866
Mob. +31(0)682292310
martin.smit@peikko.com

Joris van Hezewijk

Joris van Hezewijk

Sales– en Marketingcoördinator

Tel. +31 (0)26 384 38 66
joris.vanhezewijk@peikko.com